High Flow Cartridge Manufacturer and Exporter from India Ahmedabad
High Flow filter cartridges are used in a wide variety of applications where high flow rates and longer service life are primary requirements. High Flow filter systems are successfully used around the world is constructed with a high surface area melt-blown Polypropylene/ Glass fiber media for low initial pressure drop & high dirt holding capacity, and higher efficiency performance.
Features & Benefits of Cartridge Filter Housing :
- Multiple pleated layer construction, filtration configuration in-out
- High filtration area up to 8m2
- Wide range chemical compatibility
- Nominally rated with retention ratings between High flow rate up to 113m³/hr (500GPM).
- Inner core for high mechanical strength, outer cage to protect the pleated media, Robust outer cage.
- Wide chemical compatibility.
- FDA approved filters.
- End Connections to fit all standard filter housings.
Dimensions
| Nominal Lengths: | 20”, 40”, 60” |
| Outside Diameter: | 6.0” (15.2 cm) |
| Surface Area: | 2.9 m² per 20” element 5.8 m² per 40” element 8.7 m² per 60” element |
Operating Parameters
| Recommended Changeout | |
| Differential Pressure: | 2.1-2.4 Bar at 82ºC for PP 2.5 Bar at 121ºC forGF |
| Maximum Temperature: | Maximum Temperature in aqueous system is 60ºC |
Product Specification
| Filter Medium: | Polypropylene/Fibre Glass |
| Support/Drainage Layer: | Polypropylene/ Polyester/ GlassFibre |
| Core – Inner/Outer | High Strength Polypropylene |
| End Caps: | Glass Filled Polypropylene |
| O-Rings: | EPDM, Silicone, Buna-N, Viton |
| Micron Ratings: | 1, 3, 5, 10, 20, 40, 60, 100 µm |
